riser
CFIHOS
TagAndEquipmentClass
ID: CFIHOS-30000502
Faça login para ver esta definição.
Hierarchy
Broader / Parent
Narrower / Children
Properties / Attributes (33)
| Name | Data Type | Unit / Valid values | Required | Definition |
|---|---|---|---|---|
| design specification | Text |
— | Optional | A specification according to which an item is intended to be designed |
| fluid name | Text |
— | Optional | The name of the product in liquid or gas phase. |
| hydrostatic test pressure | Number |
PRESS | Optional | A test pressure applicable when using water to establish the test pressure. |
| length | Number |
LENGTH | Optional | Is a distance measured in the direction of the longest side of an item or in the direction of its main axis. |
| lower limit design temperature | Number |
TEMP | Optional | The lowest temperature at which a functional or physical object is designed. |
| lower limit operating pressure | Number |
PRESS | Optional | A pressure which is the lowest pressure at which a functional or physical object is expected to operate. |
| lower limit operating temperature | Number |
degree celsius | Optional | A temperature that is the lowest temperature at which a functional or physical object is expected to operate. |
| nominal diameter | Number |
LENGTH | Optional | A diameter which is an expected (theoretical/as designed) diameter. |
| normal operating pressure | Number |
bar gauge | Optional | A pressure at which a functional or physical object is expected to operate normally. |
| normal operating temperature | Number |
degree celsius | Optional | A temperature at which a functional or physical object is expected to operate normally. |
| upper limit design pressure | Number |
PRESS | Optional | The highest pressure at which a functional or physical object is designed for. |
| upper limit design temperature | Number |
TEMP | Optional | The highest temperature at which a functional or physical object is designed. |
| upper limit operating pressure | Number |
bar gauge | Optional | A pressure which is the highest pressure at which a functional or physical object is expected to operate. |
| upper limit operating temperature | Number |
degree celsius | Optional | A temperature that is the highest temperature at which a functional or physical object is expected to operate. |
| asphaltenes | Boolean |
— | Optional | Specify if asphaltenes is present or not. |
| corrosion allowance | Number |
millimetre | Optional | A thickness that is the upper limit of allowed corrosion of a metal structure. |
| corrosion inhibitor | Boolean |
— | Optional | Specify if corrosion inhibitor present or not. |
| external corrosion protection | Text |
— | Optional | Specify the external corrosion protection type |
| fluid corrosiveness | Text |
— | Optional | Specify which type of corrosive agents are present in the process fluid. |
| gas lift | Boolean |
— | Optional | Specify if gas lift is installed or not. |
| hydrate formation | Boolean |
— | Optional | Specify if hydration formation occurred or not. |
| lower limit allowable temperature | Number |
TEMP | Optional | The temperature which is the lowest allowed. |
| material | Text |
— | Optional | Is a possessed aspect being a role of the substance of an artefact when used to construct the artefact from. Therefore the substance should be in a solid state at the conditions at which the artefact exists. |
| mechanical protection | Text |
— | Optional | Specify the type of mechanical protection. |
| nominal pipe diameter | Number |
millimetre | Optional | The nominal diameter (i.e. not the actual diameter, but an approximate diameter as it may appear on a vendor datasheet) of the equipment at the upstream boundary of the section. |
| post weld heat treatment | Boolean |
— | Optional | Is a heat treatment after welding. Intended to ensure that the atomic structure of a weld and heat-affected zone is restored to an optimum corrosion-resistant structure. |
| riser layout | Text |
— | Optional | Specify the type of layout for riser. |
| sand production | Boolean |
— | Optional | Specify if sand produced or not. |
| scale formation | Boolean |
— | Optional | Specify if scale formation occurred or not. |
| upper limit allowable pressure | Number |
PRESS | Optional | The pressure which is the highest allowed. |
| upper limit allowable temperature | Number |
TEMP | Optional | The temperature which is the highest allowed. |
| wall thickness | Number |
millimetre | Optional | A thickness which is the thickness of the part of an object normally called wall: wall thickness of a pipe, thickness of a building wall, etc. |
| wax formation | Boolean |
— | Optional | Specify if wax formation occurred or not. |
