boiler
CFIHOS
TagAndEquipmentClass
ID: CFIHOS-30000384
Faça login para ver esta definição.
Hierarchy
Broader / Parent
- heat exchanger CFIHOS
Properties / Attributes (70)
| Name | Data Type | Unit / Valid values | Required | Definition |
|---|---|---|---|---|
| explosion protection gas group | Text |
— | Optional | Specify the gas group classification of the physical object in accordance with IEC/EN 60079-20 |
| explosion protection temperature class | Text |
— | Optional | Specify the temperature classification of the physical object in accordance with CENELEC EN50014 |
| explosion protection zone | Text |
— | Optional | Specify the hazardous zone in which the functional or physical object is expected to operate. |
| explosion rated item | Boolean |
— | Optional | An indicator that an equipment has been classified as safe for use in hazardous areas |
| insulation code | Text |
— | Optional | Specify insulation code, handbook or industry practice. |
| minimum design metal temperature | Number |
degree celsius | Optional | Is a temperature that is the lowest at which a significant load can be applied. Typically applied to a pressure vessel. Defined by the ASME Code, Section VIII, Division 1, paragraph UG-20 (see Section 3). |
| steam drum relief valve set pressure | Number |
bar gauge | Optional | The pressure at which a functional or physical object is activated. |
| superheater relief valve set pressure | Number |
bar gauge | Optional | The pressure at which a functional or physical object is activated. |
| air preheater type | Text |
— | Optional | Is a subtype of preheater |
| ATEX category | Text |
— | Optional | Specify in which category the physical object is divided in accordance with the directive 94/9/EC. |
| ATEX explosive atmosphere | Text |
— | Optional | Specify in which explosive atmosphere the physical object is divided in accordance with the directive 94/9/EC. |
| ATEX group | Text |
— | Optional | Specify in which group the physical object is divided in accordance with the directive 94/9/EC. |
| boiler type | Text |
— | Optional | Is a subtype of boiler |
| burner type | Text |
— | Optional | Is a subtype of burner |
| downcomer corrosion allowance | Number |
millimetre | Optional | Is a thickness that is a bonus on a wall thickness to compensate for expected corrosion. |
| downcomer length | Number |
millimetre | Optional | Is a distance measured in the direction of the longest side of an item or in the direction of its main axis. |
| downcomer material | Text |
— | Optional | Is a possessed aspect being a role of the substance of an artefact when used to construct the artefact from. Therefore the substance should be in a solid state at the conditions at which the artefact exists. |
| downcomer number of tubes | Number |
COUNT | Optional | Is a number of items where each item is a tube. |
| downcomer outside diameter | Number |
millimetre | Optional | Is an outside diameter of an item that is the prime outside diameter in case the item has more than one outside diameter. |
| downcomer wall thickness | Number |
millimetre | Optional | Is a thickness according to a design. |
| economizer corrosion allowance | Number |
millimetre | Optional | Is a thickness that is a bonus on a wall thickness to compensate for expected corrosion. |
| economizer effective outside surface area | Number |
square metre | Optional | Is an area located on a surface. |
| economizer material | Text |
— | Optional | Is a possessed aspect being a role of the substance of an artefact when used to construct the artefact from. Therefore the substance should be in a solid state at the conditions at which the artefact exists. |
| economizer number of tubes | Number |
COUNT | Optional | Is a number of items where each item is a tube. |
| economizer tube length | Number |
millimetre | Optional | Is a distance measured in the direction of the longest side of an item or in the direction of its main axis. |
| economizer tube outside diameter | Number |
millimetre | Optional | Is an outside diameter of an item that is the prime outside diameter in case the item has more than one outside diameter. |
| economizer wall thickness | Number |
millimetre | Optional | Is a thickness according to a design. |
| explosion protection concept | Text |
— | Optional | Specify the identification of electrical equipment's explosion protection and type of ignition protection in accordance with IEC/EN 60079-0. |
| explosion protection examination certificate number | Text |
— | Optional | The examination certificate number for the physical object issued by a notified body. |
| explosion protection material group | Text |
— | Optional | Specify for purposes of testing, approval, and area classification, various air mixtures (not oxygen-enriched) grouped in accordance with 500.6(A) and (B). |
| explosion protection notified body | Text |
— | Optional | The name of the nationally accredited approval body that has issued the examination certificate for the physical object. |
| flue gas duct height | Number |
millimetre | Optional | The maximum height of a functional or physical object above its base when installed. |
| flue gas duct lining material | Text |
— | Optional | Is a material of construction of which a lining is made. |
| flue gas ducting material | Text |
— | Optional | Is a possessed aspect being a role of the substance of an artefact when used to construct the artefact from. Therefore the substance should be in a solid state at the conditions at which the artefact exists. |
| flue gas ducting material specification | Text |
— | Optional | Is a specification which describes the applicable materials for one or more items. |
| flue gas ducting thickness | Number |
millimetre | Optional | Is a thickness according to a design. |
| height | Number |
millimetre | Optional | A distance from the bottom to the top of something standing upright. |
| ingress protection | Text |
— | Optional | Specify the degree of ingress protection for the physical object in accordance with IEC/EN 50629 or NEMA, UL and CSA type rating. |
| legal registration number | Text |
— | Optional | Registration for legal reasons. |
| mud drum inside diameter | Number |
millimetre | Optional | Is an inside diameter of an item that is the prime inside diameter in case the item has more than one inside diameter. |
| mud drum length | Number |
millimetre | Optional | Is a distance measured in the direction of the longest side of an item or in the direction of its main axis. |
| mud drum material specification | Text |
— | Optional | Is a specification which describes the applicable materials for one or more items. |
| mud drum wall thickness | Number |
millimetre | Optional | Is a thickness according to a design. |
| stack material | Text |
— | Optional | Is a possessed aspect being a role of the substance of an artefact when used to construct the artefact from. Therefore the substance should be in a solid state at the conditions at which the artefact exists. |
| stack wall thickness | Number |
millimetre | Optional | Is a thickness according to a design. |
| stacking lining material | Text |
— | Optional | Is a material of construction of which a lining is made. |
| steam drum inside diameter | Number |
LENGTH | Optional | Is an inside diameter of an item that is the prime inside diameter in case the item has more than one inside diameter. |
| steam drum length | Number |
millimetre | Optional | Is a distance measured in the direction of the longest side of an item or in the direction of its main axis. |
| steam drum material specification | Text |
— | Optional | Is a specification which describes the applicable materials for one or more items. |
| steam drum pressure relief device | Text |
— | Optional | By which protection is provided against overpressure. |
| steam drum shell wall thickness | Number |
millimetre | Optional | Is a thickness according to a design. |
| steam section length | Number |
millimetre | Optional | Is a distance measured in the direction of the longest side of an item or in the direction of its main axis. |
| steam section wall thickness | Number |
millimetre | Optional | Is a thickness according to a design. |
| stream drum material | Text |
— | Optional | Is a possessed aspect being a role of the substance of an artefact when used to construct the artefact from. Therefore the substance should be in a solid state at the conditions at which the artefact exists. |
| superheater box length | Number |
millimetre | Optional | Is a distance measured in the direction of the longest side of an item or in the direction of its main axis. |
| superheater box material specification | Text |
— | Optional | Is a specification which describes the applicable materials for one or more items. |
| superheater box wall thickness | Number |
millimetre | Optional | Is a thickness according to a design. |
| superheater corrosion allowance | Number |
millimetre | Optional | Is a thickness that is a bonus on a wall thickness to compensate for expected corrosion. |
| superheater effective outside surface area | Number |
square metre | Optional | Is an area located on a surface. |
| superheater material | Text |
— | Optional | Is a possessed aspect being a role of the substance of an artefact when used to construct the artefact from. Therefore the substance should be in a solid state at the conditions at which the artefact exists. |
| superheater number of tubes | Number |
COUNT | Optional | Is a number of items where each item is a tube. |
| superheater pressure relief device | Text |
— | Optional | By which protection is provided against overpressure. |
| superheater tube outside diameter | Number |
millimetre | Optional | Is an outside diameter of an item that is the prime outside diameter in case the item has more than one outside diameter. |
| tube corrosion allowance | Number |
millimetre | Optional | Is a thickness that is a bonus on a wall thickness to compensate for expected corrosion. |
| tube length | Number |
millimetre | Optional | A distance that is the length of a tube. |
| tube material | Text |
— | Optional | Is a possessed aspect being a role of the substance of an artefact when used to construct the artefact from. Therefore the substance should be in a solid state at the conditions at which the artefact exists. |
| tube outside diameter | Number |
millimetre | Optional | Is an outside diameter of an item that is the prime outside diameter in case the item has more than one outside diameter. |
| tube outside surface area | Number |
square metre | Optional | Is an area located on a surface. |
| tube wall thickness | Number |
millimetre | Optional | Is a thickness according to a design. |
| wall tubes number of tubes | Number |
COUNT | Optional | Is a number of items where each item is a tube. |
